How to tile a bathroom wall – experiment with new patterns and textures

Tiling is skilled work so if you wish to learn to tile your bathroom wall yourself you will want advice right out the experts.

Tiles would be the natural option for decorating bathroom walls. In addition to being practical and simple to wash, the numerous bathroom tile ideas available mean additionally they offer endless design possibilities.

Lounging new wall tiles inside a bathroom is among the how to update this space. However, based on what amount of the wall you decide to tile, and factoring inside a 10 percent surplus incase of breakages, a brand new group of tiles may become costly.

If you’re working inside a budget, you are able to spend less by understanding how to tile your bathroom wall yourself. Therefore we requested skillfully developed for his or her advice regarding how to tile your bathroom wall just like a professional.

WHAT SURFACE Is Required FOR WALL TILES?

Before tiling you have to make sure that your bathroom walls are smooth, waterproof and powerful enough to aid your selected tiles.

‘If your surface is uneven you are able to overboard it having a tile backer board that will offer an even surface to create fitting much simpler,’ explains Amanda Telford, CTD Tiles Marketing Manager. ‘Whatever surface you’re tiling onto must be load bearing capable to contain the weight from the tiles, adhesive and grout combined.’

1. PREPARE The Restroom WALL FOR TILING

Prior to starting to tile make certain the wall continues to be sanded lower, cleaned and sealed.

When the walls have to be strengthened, this is time to set up a backerboard based on the manufacturer’s instructions.

2. Combine The Restroom TILES To Prevent COLOR DISCREPANCIES

Plan how you would like them to appear. Lay them from the floor, to try out any patterns. Avoid any stark color discrepancies by mixing tiles from the 3 boxes, this helps achieve a mix of color, texture and pattern.

3. Exercise YOUR Beginning POINT

Create a tile gage utilizing a wooden batten. Put it on the ground alongside a row of tiles, with spacers among and mark each tile around the wooden batten.

Calculating the wall horizontally discover the midpoint and align the very first line around the tile gage by using it. Slowly move the gage left mark by mark, before the wooden batten is near to the corner from the wall. Mark on your wall in which the last tile would finish, and taking advantage of a spirit level draw a line towards the ceiling.

Repeat the whole process again vertically, before screwing wooden battens into position within the lines – your beginning point may be the corner in which the battens meet.

4. LAY The Entire TILES

Out of your beginning point, make use of a notched spreader to pay for area of the wall in adhesive. Use the tile firmly having a slight twisting action. Repeat with all of those other tiles, inserting spacers in between each one.

Make use of the wooden batten and spirit level to guarantee the tiles are straight and level. Once the adhesive has completely dried take away the wooden battens.

5. CUT AND LAY The Rest Of The TILES

Appraise the gap between your last full tile and also the wall. Comprising the spacer, mark the measurement on the tile and scour a line, before snapping the tile. Repeat throughout the tiles.

Beginning from the foot of the primary design, lay the cut tiles within the same ways because the full tiles.